Lynx 34mm Low Stud Type Rings

The Lynx 34mm Low Stud Type Rings provide a low-profile mounting option for riflescopes with a 34 mm main tube. Made from guncoated steel in South Africa, these rings attach to a compatible Lynx stud-base mounting system. Their low height can help position the scope closer to the rifle, subject to adequate clearance.

Lynx 34mm Low Stud Type Rings

These rings use Lynx’s stud-type mounting system rather than a Picatinny rail. Therefore, confirm that your rifle already has compatible stud bases before selecting this ring set. Stud-type rings and Picatinny rings use different mounting interfaces and are not interchangeable without the appropriate base system.

The low version has a published stem height of 11.5 mm, measured from the top of the base to the underside of the ring where the bottom of the scope sits. This measurement helps when planning scope height. However, the correct fit also depends on the objective housing, barrel profile and rifle configuration.

The rings accommodate a 34 mm scope tube. Check the diameter stamped or specified for your riflescope before installation, as 30 mm and 1-inch tubes require different rings. In addition, verify that the objective bell clears the barrel and that the bolt handle can operate freely.

For alternative mounting arrangements, the Rings & Bases category provides a useful reference for comparing scope mounting options. You can also consult the official Lynx stud rings specifications to confirm the ring type and dimensions.

Compatibility and Related Equipment

Before fitting the rings, check the mounting instructions for the installed bases. Position the scope to obtain suitable eye relief and a full field of view, then align the reticle before tightening the ring caps evenly. Use the manufacturer’s recommended torque where specified, since excessive tightening can damage the scope tube.

Although low rings can reduce mounting height, they may not provide enough clearance for every objective lens or rifle configuration. Therefore, check the complete scope-and-rifle combination before finalising the installation.

The Lynx 34mm Low Stud Type Rings suit compatible 34 mm riflescopes and Lynx stud bases. Confirm the mounting interface, objective clearance and eye relief before installation.